^ Name ^ Default value ^ Unit ^ Range ^ Description ^ | ArmState_Enable | 1 | | 0,1,2 | 0:disable, 1:enable | | ArmState_Panel | 1 | | | Which panel will be displayed. Multi-panels separated by comma like 1,3 | | ArmState_H_Position | 350 | | 0-350 | Horizontal position | | ArmState_V_Position | 44 | | 0-230 | Vertical position. maximum is 230 of NTSC, and 250 of PAL | | ArmState_Font_Size | 0 | | 0,1,2 | 0:small, 1:normal, 2:large | | ArmState_H_Alignment | 2 | | 0,1,2 | 0:left, 1:middle, 2:right | | BatteryVoltage_* | | | | voltage of battery | | BatteryCurrent_* | | | | current of battery | | BatteryRemaining_* | | | | Battery remaining | | BatteryConsumed_* | | | | total current drawn since startup in amp-hours | | FlightMode_* | | | | Flight mode | | Attitude_MP_* | | | | Show the UAV attitude like MissionPlanner style HUD | | Attitude_MP_Scale | 1 | | | The scale factor of display. You can set the value like 0.8, 1.2, 2.0 and etc | | Attitude_3D_* | | | | 3D style attitude HUD | | Attitude_3D_Scale | 1 | | | The scale factor of display. You can set the value like 0.8, 1.2, 2.0 and etc | | Attitude_3D_radius | 40 | | | The radius of map-like indicator alone with UAV 3D model | | Misc_Units_Mode | 0 | | | 0:Metric 1:Imperial | | Misc_Max_Panels | 3 | | >=1 | Max OSD display panels | | Misc_Start_Row | 0 | | 0 ~ 20 | Sometimes you will find the item doesn't show on the top of screen when the y is zero. Try to set a offset value. | | Misc_Start_Col | 0 | | -20 ~ 20 | Sometimes you will find the item doesn't show on the left of screen when the x is zero. Try to set a offset value. | | Misc_Video_Mode | 1 | | >=1 | Video Mode.0:NTSC 1:PAL. Should keep same with the camera. | | Misc_USART_BandRate | 7 | | 1-8 | 1:4800、2:9600、3:19200、4:38400、5:43000、6:56000、7:57600、8:115200 |