Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Toolchain Installation (Windows) ======
+  * [[http://firmware.diydrones.com/Tools/PX4-tools/px4_toolchain_installer_v14_win.exe|PX4 Toolchain Installer v14 for Windows Download]] (32/64 bit systems, complete build system, drivers)
+  * **[[http://pixhawk.org/static/px4driver.msi|PX4 Driver Installer for Windows Download]]** (32/64 bit systems)
+== Additional Recommended Tools ==
+  * [[http://www.java.com/en/download/|Java]] (needed for Eclipse which comes with the Toolchain Installer)
+===== Instructions =====
+After the installation, you can find the PX4 Toolchain at the programs menu.
+{{:playuavosd:dev:px4tc.jpg?200}}
+==== Source Download ====
+Start the app "PX4 Console", assuming the toolchain was installed to the default path, 'd:\px4' and you want to save the playuavosd at 'D:\Project'.
+{{:playuavosd:dev:win_src_download.png?600}}
+CMD1: Change the current directory to the root of device D
+CMD2: If there is no folder "Project", create one. Otherwise, ignore this step
+CMD3: Change the current directory to "D:\Project"
+CMD4: Using GIT command download the source from github.
+Then you will have playuavosd firmware on your disk "D:\Project\PlayuavOSD\"
+==== Build using console command ====
+Change the current directory to "PlayuavOSD" and type "make" command at the PX4 Console. Then you will get the executable file:
+The playuavosd.bin can be flashed to chip directly. The start address is 0x8004000. Address before 0x8004000 used for bootloader.
+The playuavosd.hex can be used with the OSD config tool. It is automatically generated during the make process.
+==== Build using Eclipse IDE ====
+TODO