Differences

This shows you the differences between two versions of the page.

--- projects:playuavosd:start [2015/07/10 04:09]
admin
+++ projects:playuavosd:start [2015/11/30 08:09] (current)
@@ Line 8: / Line 8: @@
 Board size: 33mm*26mm
-{{:projects:playuavosd:playuavosd-view.jpg?200|}}{{:projects:playuavosd:screendisplay.jpg?200|}}{{:projects:playuavosd:px4osd.jpg?200|}}{{:projects:playuavosd:apmosd.jpg?200|}}
+{{:projects:playuavosd:playuavosd-view.jpg?200|}}{{:projects:playuavosd:screendisplay.jpg?200|}}
   * Dual video inputs, front and rear cameras(real time switch via the remote control)
   * Support multiple types of flight control, such as the mavlink protocol used by APM2.x and pixhawk, UAVTalk protocol used by CC3D and revolution (Beta version), as well as the CAN protocol of DJI (under development).
@@ Line 16: / Line 16: @@
 ===== Usage =====
-  *[[:projects:playuavosd:hardware|Wired]]
+  *[[:projects:playuavosd:hardware|Hardware wired]]
   *[[:projects:playuavosd:instruction|Instruction]]
+  *[[:projects:playuavosd:parameters|Parameters]]
 ===== Developer=====
 PlayuavOSD repository can be found here:[[https://github.com/PlayUAV/PlayuavOSD]]
-  *The firmware was built by KEIL IDE v5(will change the compile tool to the more common ARM GCC)
+  *The firmware ARM GCC. Build instruction([[:playuavosd:dev:windows_build|windows]])
   *The configuration tool was written by c# and can be built by Visual Studio 2010(or later).
-  *The PCB and schematic files located at "hardware" folder. Designer by Altium Designer. It will be great if someone could help converting to other file formats like Eagle.
+  *The PCB and schematic files located at "hardware" folder. The files can be opend by Altium Designer. It will be great if someone could help converting to other file formats like Eagle.
+===== Video=====
+[[http://youtu.be/J1JjweJYKMc|Configuration video]]
+[[http://youtu.be/nbF5R-X6scU|Flying video]]